Essential parameter
Maximum Tension(kN):2*35 or 1*70
Continuous Tension(kN):2x30 or 1x60
Maximum speed (km/h):5
Bull wheel bottom of groove diameter(mm):Φ1200
Number of grooves:2x5
Maximum pull-back (kN):2x30 or 1x60
Maximum pull-back speed(km/h):2*2.1
Maximum suitable conductor diameter (mm):Φ32
Engine power /speed (kW/rpm):51/2500
Dimensions (mm): 4400x2100x2600
Weight(kg):4000
Uses
it's used for stringing various conductors and earth wires.suitable for stringing one conductor or two bundle conductors.
Feature
1.Bull wheel with wearproof MC nylon lining segments.
2.Infinitely variable tension control and constant tension conductor stringing
3.Spring applied hydraulic released brake acts automatically in case of
hydraulic failure to ensure safety.
4.Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand .
Main component
1.Engine:Beinei Deutz air cooled diesel engine.
2.Main pump/motor: Rexroth(BOSCH)
3.Reducer: Rexroth(BOSCH)
4.Main hydraulic valve: Rexroth(BOSCH)
Product Overview
The SA-YZ 2×35 hydraulic tensioner is designed for conductor and earth wire stringing in overhead transmission line construction. It provides a maximum tension of 2×35 kN or 1×70 kN, with a continuous tension of 2×30 kN or 1×60 kN.
The machine is suitable for single conductor and twin-bundle conductor stringing. Its hydraulic tension control system allows operators to adjust the pulling force continuously, helping maintain stable tension during installation.
Equipped with a 1200 mm bull wheel with wear-resistant MC nylon lining, the SA-YZ 2×35 handles conductors with a maximum suitable diameter of 32 mm. Its compact design and 4000 kg operating weight make it suitable for transmission line construction projects requiring controlled conductor tension.
Applications
The SA-YZ 2×35 hydraulic tensioner is designed for the following applications:
- Overhead transmission line construction
- Single conductor stringing
- Twin-bundle conductor stringing
- Earth wire stringing
- Transmission line installation
- Existing transmission line upgrading and reconductoring
Key Features
- Maximum tension of 2×35 kN or 1×70 kN
- Continuous tension of 2×30 kN or 1×60 kN
- Infinitely variable hydraulic tension control
- Constant-tension conductor stringing
- 1200 mm bull wheel with wear-resistant MC nylon lining
- Spring-applied, hydraulically released safety brake
- Automatic brake engagement in case of hydraulic failure
- Two hydraulic power output interfaces for hydraulic conductor reel stands
Technical Specifications of SA-YZ 2×35
Specification | Value |
|---|---|
Model | SA-YZ 2×35 |
Maximum Tension | 2×35 kN / 1×70 kN |
Continuous Tension | 2×30 kN / 1×60 kN |
Maximum Stringing Speed | 5 km/h |
Bull Wheel Diameter | 1200 mm |
Number of Grooves | 2×5 |
Maximum Pull-back | 2×30 kN / 1×60 kN |
Maximum Pull-back Speed | 2×2.1 km/h |
Maximum Conductor Diameter | 32 mm |
Engine Power / Speed | 51 kW / 2500 rpm |
Dimensions | 4400 × 2100 × 2600 mm |
Weight | 4000 kg |
Tension Control and Safety
The SA-YZ 2×35 uses a hydraulic system to provide continuously adjustable tension during conductor stringing. Operators can control the pulling force according to the requirements of the installation.
The machine is equipped with a spring-applied, hydraulically released brake. In the event of hydraulic system failure, the brake engages automatically to help prevent uncontrolled movement during operation.
FAQ
1. What is the maximum tension of the SA-YZ 2×35 hydraulic tensioner?
The maximum tension is 2×35 kN or 1×70 kN, depending on the operating configuration.
2. What is the continuous tension of this machine?
The continuous tension is 2×30 kN or 1×60 kN.
3. What is the maximum conductor diameter?
The maximum suitable conductor diameter is 32 mm.
4. What is the bull wheel diameter of the SA-YZ 2×35?
The bull wheel has a bottom-of-groove diameter of 1200 mm and uses wear-resistant MC nylon lining segments.