Essential parameter
Maximum Tension(kN):2x90 or 1x180,
Continuous Tension(kN):2x80 or 1x160,
Maximum speed (km/h):5
Bull wheel bottom of groove diameter(mm): Φ1850
Number of grooves:2x6
Maximum pull-back (kN):2x90 or 1x180
Maximum pull-back speed(km/h):2x1.7
Maximum suitable conductor diameter (mm): Φ48.8
Engine power /speed (kW/rpm):82.5/2500
Dimensions (mm): 5300*2290*2950
Weight(kg):10500
Uses
it's used for stringing various conductors and earth wires.suitable for
stringing one conductor or two bundle conductors
Feature
1.Bull wheel with wearproof MC nylon lining segments.
2.Infinitely variable tension control and constant tension conductor stringing.
3.Spring applied hydraulic released brake acts automatically in case of
hydraulic failure to ensure safety.
4.Attached two sets of hydraulic power output interface to connect hydraulic
conductor reel stand .
5.Parallel operation interfaces are available for controlling two or more
machines together.
Main component
1.Engine :Deutz(Germany) air cooled diesel engine .
2.Main pump/motor:Rexroth(BOSCH)
3. Main hydraulic valve:Rexroth(BOSCH)
4.Reducer:RR(Italian)
Product Overview
The SA-YZ 2×90 hydraulic tensioner is designed for high-tension conductor and earth wire stringing during overhead transmission line construction. It provides a maximum tension of 2×90 kN or 180 kN when operated as a single circuit.
The machine is suitable for stringing a single conductor or twin-bundle conductors. Its hydraulic tension control system maintains a stable pulling force during stringing, helping operators control conductor tension throughout the installation process.
With an 1850 mm bull wheel and a maximum suitable conductor diameter of 48.8 mm, the SA-YZ 2×90 is designed for large-scale transmission line projects where high pulling and tensioning capacity is required.
Applications
The SA-YZ 2×90 hydraulic tensioner is suitable for:
- Overhead transmission line construction
- High-voltage conductor stringing
- Single conductor stringing
- Twin-bundle conductor stringing
- Earth wire stringing
- Transmission line upgrading and reconductoring
- Large-scale power line installation projects
Tension Control and Safety
The SA-YZ 2×90 uses hydraulic tension control for controlled conductor stringing. The tension can be adjusted continuously according to the requirements of the installation.
A spring-applied, hydraulically released brake automatically engages in the event of hydraulic failure, helping prevent uncontrolled movement and improving operational safety during stringing.
FAQ
What is the maximum tension of the SA-YZ 2×90?
The maximum tension is 2×90 kN, or 180 kN when operated as a single circuit.
What type of conductors can the machine string?
The SA-YZ 2×90 is designed for conductor and earth wire stringing, including single and twin-bundle conductor installation.
What is the bull wheel diameter?
The bull wheel has a bottom-of-groove diameter of 1850 mm and uses wear-resistant MC nylon lining segments.
What happens if the hydraulic system fails?
The spring-applied, hydraulically released brake automatically engages in the event of hydraulic failure to help maintain operational safety.