Essential parameter
Maximum Tension(kN):2x55 or 1x110
Continuous Tension(kN):2x50 or 1x100
Maximum speed (km/h):5
Bull wheel bottom of groove diameter(mm): Φ1600
Number of grooves:2x5
Maximum pull-back (kN):2*50 or 1x100
Maximum pull-back speed(km/h):2x2.1
Maximum suitable conductor diameter (mm): Φ42.5
Engine power /speed (kW/rpm):54/2500
Dimensions (mm): 5000x2240x2730
Weight(kg):7500
Uses
it's used for stringing various conductors and earth wires.suitable for stringing one
conductor or two bundle conductors.
Feature
1.Bull wheel with wearproof MC nylon lining segments.
2.Infinitely variable tension control and constant tension conductor stringing .
3.Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensure safety.
4.Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Main component
1.Engine :Deutz(Germany) air cooled diesel engine.
2.Main pump/motor:Rexroth(BOSCH)
3.Main hydraulic valve:Rexroth(BOSCH)
4.Reducer:RR[ltalian)
Product Overview
The SA-YZ 2×55 hydraulic tensioner is designed for controlled conductor and earth wire stringing during overhead transmission line construction. It provides a maximum tension of 2×55 kN or 1×110 kN, with a continuous tension of 2×50 kN or 1×100 kN.
The machine can be used for single conductor and twin-bundle conductor stringing. Its hydraulic tension control system allows the operator to adjust the tension continuously during the stringing operation, helping maintain stable conductor tension throughout installation.
With a 1600 mm bull wheel and a maximum suitable conductor diameter of 42.5 mm, the SA-YZ 2×55 is suitable for medium- and high-capacity transmission line stringing projects.
Applications
The SA-YZ 2×55 hydraulic tensioner is suitable for:
- Overhead transmission line construction
- Conductor stringing
- Earth wire stringing
- Single conductor installation
- Twin-bundle conductor stringing
- Transmission line reconductoring
- Power line upgrading and maintenance
Key Features
- Maximum tension of 2×55 kN or 1×110 kN
- Continuous tension of 2×50 kN or 1×100 kN
- Infinitely variable tension control
- Constant-tension conductor stringing
- 1600 mm bull wheel with wear-resistant MC nylon lining
- Automatic braking in case of hydraulic failure
- Two hydraulic power output interfaces for conductor reel stand connection
Technical Specifications
| Specification | SA-YZ 2×55 |
|---|---|
| Maximum Tension | 2×55 kN or 1×110 kN |
| Continuous Tension | 2×50 kN or 1×100 kN |
| Maximum Speed | 5 km/h |
| Bull Wheel Diameter | 1600 mm |
| Number of Grooves | 2×5 |
| Maximum Pull-Back | 2×50 kN or 1×100 kN |
| Maximum Pull-Back Speed | 2×2.1 km/h |
| Maximum Suitable Conductor Diameter | 42.5 mm |
| Engine Power / Speed | 54 kW / 2500 rpm |
| Dimensions | 5000 × 2240 × 2730 mm |
| Weight | 7500 kg |
Main Components
| Component | Specification |
|---|---|
| Diesel Engine | Deutz, Germany |
| Main Pump & Motor | Rexroth / Bosch |
| Main Hydraulic Valve | Rexroth / Bosch |
| Reducer | RR, Italy |
Tension Control and Safety
The SA-YZ 2×55 uses hydraulic tension control to maintain a stable pulling force during conductor stringing. The tension can be adjusted continuously according to the requirements of the installation.
A spring-applied, hydraulically released brake automatically engages in the event of hydraulic failure, helping prevent uncontrolled movement and improve operational safety during stringing.