HONYUAN · Cable installation & power line equipmentManufacturer & export supplier · Qingdao, China
Home / Power Equipment / Winches / 5 Ton Honda Engine Driven Cable Pulling Winch
Engine-driven cable pulling equipment · Model HYJJQ-50-B

5 Ton Honda Engine Driven Cable Pulling Winch

A practical pulling solution for power line construction and conductor installation. The HYJJQ-50-B combines a 6.6 kW Honda gasoline engine with four speed settings, giving crews a choice of pulling force and line speed for different stages of a job.

50 kNMaximum pulling force
6.6 kWHonda gasoline engine
4 settingsPulling speed options
HYJJQ-50-B 5 ton Honda engine driven cable pulling winch for power line construction
HYJJQ-50-B Cable Pulling WinchProduct image
50 kNRated maximum pulling force
26.5 m/minFast gear line speed
138 kgListed net weight
1100 mmOverall length
Product overview

Built for cable pulling on demanding job sites

When a cable installation project calls for controlled pulling force and a self-contained power source, choosing the right winch makes a difference to the work plan.

The HYJJQ-50-B is an engine-driven winch developed for power line construction, overhead conductor installation and related cable pulling work. Its Honda gasoline engine delivers 6.6 kW of power, while the straight-shaft transmission transfers drive to the pulling mechanism.

Four gear settings let the operator select from faster line movement to a slower, higher-force setting. This gives the crew flexibility when the pulling requirements change during installation.

At a glance

A straightforward configuration for teams working on electrical infrastructure and cable installation projects.

  • Honda gasoline engine, rated at 6.6 kW
  • Maximum pulling force of 50 kN
  • Four pulling force and speed combinations
  • Straight-shaft transmission
  • Compact listed dimensions: 1100 × 525 × 600 mm
  • Net weight: 138 kg
Technical data

HYJJQ-50-B technical specifications

Use the figures below when checking the winch against your cable pulling plan. Confirm the final configuration and operating conditions with the supplier before ordering.

Maximum pulling force
50 kN

Approximately 5 tons of maximum pulling force, with four gear settings to match different pulling requirements.

26.5m/min · 9 kN
14.5m/min · 15 kN
9.0m/min · 25 kN
4.5m/min · 50 kN
ModelHYJJQ-50-B
EngineHonda gasoline engine
Engine power6.6 kW
Maximum pulling force50 kN
Fast gear9 kN / 26.5 m/min
Medium gear 115 kN / 14.5 m/min
Medium gear 225 kN / 9.0 m/min
Slow gear50 kN / 4.5 m/min
TransmissionStraight-shaft transmission
Net weight138 kg
Dimensions (L × W × H)1100 × 525 × 600 mm
ConditionNew
CustomizationAvailable; confirm requirements with supplier
Design details

Four practical points to consider

The machine's core configuration is focused on engine-driven operation, selectable pulling speeds and manageable site handling.

⚙

Four pulling speed settings

Choose between four listed force and speed combinations to suit the pulling stage and job requirements.

◉

Honda gasoline engine

The 6.6 kW engine provides an onboard power source for work locations where an electrical supply may not be convenient.

↗

Straight-shaft transmission

A direct mechanical drive arrangement connects the engine output to the winch transmission system.

▣

50 kN maximum pulling force

The slow gear is specified at 50 kN and 4.5 m/min for applications requiring the highest listed pulling force.

⌂

Site-ready dimensions

At 1100 × 525 × 600 mm and 138 kg net weight, the listed footprint can be considered during transport and site layout planning.

✚

Customization support

The supplier lists customization as available. Share your project requirements to confirm feasible options and final specifications.

Typical applications

For power line and cable installation work

The HYJJQ-50-B is intended for pulling tasks associated with electrical infrastructure construction and maintenance.

01 / TRANSMISSION

Overhead transmission line installation

02 / CONDUCTORS

Electrical conductor pulling

03 / DISTRIBUTION

Power distribution network construction

04 / CABLE WORK

Cable installation and pulling projects

05 / INFRASTRUCTURE

Utility infrastructure development

06 / MAINTENANCE

Electrical engineering and maintenance

Before you order

Help us understand your pulling job

A few project details make it easier to check whether this winch is a suitable match and prepare an accurate quotation.

01

Describe the cable

Tell us the cable or conductor type, approximate diameter, total pulling distance and installation route.

02

Confirm the pulling conditions

Share the expected pulling force, required line speed, site conditions and any relevant safety requirements.

03

Check supply details

Confirm the requested configuration, quantity, destination port, packaging and delivery schedule with the supplier.

Frequently asked questions

Questions about the 5 ton cable pulling winch

Key information for buyers comparing engine-driven winches for line construction projects.

What is the maximum pulling force of the HYJJQ-50-B?

The listed maximum pulling force is 50 kN, approximately equivalent to 5 tons. The actual working setup should be selected according to the cable, route and job-specific requirements.

Which engine does this cable pulling winch use?

The HYJJQ-50-B is specified with a 6.6 kW Honda gasoline engine.

How many pulling speed settings are available?

There are four listed settings: 9 kN at 26.5 m/min, 15 kN at 14.5 m/min, 25 kN at 9.0 m/min, and 50 kN at 4.5 m/min.

What is the machine's net weight and size?

The listed net weight is 138 kg. The overall dimensions are 1100 × 525 × 600 mm.

What work is this winch suitable for?

Typical applications include overhead transmission line installation, conductor pulling, power distribution construction, cable installation and electrical infrastructure projects.

Can the winch be customized?

The product listing indicates that customization is available. Contact the supplier with your required configuration and ask for written confirmation of the options, specifications and lead time.

How can I get a quotation?

Send an inquiry through the supplier's product page. Include the required quantity, destination, cable details and project conditions so the supplier can respond with relevant pricing and shipping information.

Planning a cable pulling project?

Send your cable details, required quantity and delivery destination to China Honyuan Machinery. Ask for a quotation and confirmation of the machine configuration for your application.

Contact the Supplier ↗